IMG_5541

Same array but with all pieces set to the "optimal" height. The bottom left one had some extra material dragged into it because I missed tweezing off ooze from the nozzle at the start of the print. Despite all having the same height in the gcode you can see that the bottom left pieces are more squashed than the top right, implying a bed leveling problem

Same array but with all pieces set to the “optimal” height. The bottom left one had some extra material dragged into it because I missed tweezing off ooze from the nozzle at the start of the print. Despite all having the same height in the gcode you can see that the bottom left pieces are more squashed than the top right, implying a bed leveling problem

Leave a Reply

Your email address will not be published. Required fields are marked *